| Product Specifications |
| WAN ports |
2 RJ-45 Gigabit Ethernet |
| LAN ports |
4 RJ-45 Gigabit Ethernet
(LAN 1, 2, 3, 4 and LAN 9, 10, 11, 12 are PoE 802.3at, max 30W per port up to 120W total |
| Console/serial |
1 RJ-45 port for future use. Port is disabled |
| USB |
2 for external 3G/4G modem or flash drive (USB-3, USB-2) |
| Firewall |
Stateful packet inspection, up to 980 Mbps throughput for TCP and UDP |
| Quality of Service (QoS) |
Traffic Classes, WAN Queuing, WAN Policing, WAN Bandwidth Management, Assign detailed QoS (Class of Service (CoS)/Differentiated Services Code Point (DSCP)/policies) settings per application or end device |
| Web Security |
Dynamic web filtering: Cloud based, more than 80 categories, more than 450 million domains classified |
| Application Visibility |
Application identification: Assign policies to Internet applications
500 unique Apps |
| Client Identification |
Identifies and categorizes clients dynamically. Assigns policies based on end device category and operating system. |
| Intrusion Prevention System |
IDS/IPS inspects network packets, logs and/or blocks a wide range of network attacks. It delivers increased network availability, faster remediation, and comprehensive threat protection.
HTTP/FTP/SMTP/POP3/IMAP |
| Antivirus |
Protection from viruses, trojans, spyware, and identity theft by inspecting traffic going through the router.
HTTP/FTP/SMTP/POP3/IMAP |
| Cisco Umbrella |
First line of defense for threats on the Internet. Prevention for user and malware-initiated connections. Protection against Malware, C2 callbacks, and phishing. Proxy inspection for risky domains. |
| IPSec |
IKEv1 and IKEv2
50 simultaneous connections (any combination of remote access and site-to-site), up to 650 Mbps throughput |
| IPsec remote access |
Yes (remote access from any standards-based IPsec client and Cisco IPsec VPN EasyVPN) |
| Layer 2 Tunneling Protocol (L2TP) over IPsec |
Yes |
| Generic Routing Encapsulation (GRE) over IPsec |
Yes |
| Cisco SSL VPN (Cisco AnyConnect) |
Maximum 50 SSL VPN tunnels and up to 33Mbps throughput. Also requires Cisco AnyConnect end user licenses to use on the end device. Ideal for mobile devices. |
| Point-to-Point Tunneling Protocol (PPTP) |
25 connections, up to 100 Mbps throughput |
| Teleworker mode (Cisco IPsec VPN) |
Router acts as a client to connect to central VPN gateway in teleworker mode |
| VPN pass-through |
IPSec, PPTP, L2TP |
| Management protocols |
Web browser (HTTP/HTTPS)
Simple Network Management Protocol (SNMP) v1, v2c, and v3
Representational State Transfer (REST) API
NETCONF |
| Management Platform |
FindIT Network Manager |
| Firmware upgrade options |
Via local PC, USB stick, or from Cisco.com via web browser.
Unattended automatic firmware upgrade. |
| VLAN |
Up to 32 VLANs |
| Port Security |
Yes, 802.1X |
| Link aggregation |
Yes (static, no LACP) |
| IPv6 |
Dual stack, 6rd, 6in4, Dual stack lite |
| WAN |
DHCP client, static IP, PPPoE, PPPTP, L2TP, transparent bridge |
| Routing |
Static routing, IGMP proxy, Inter-VLAN routing, Routing Information Protocol RIPv1,v2, RIPng |
| Network Address Translation (NAT) |
Port Forwarding
Port Address Translation (PAT)
One-to-one NAT
VPN NAT traversal
Session Initiation Protocol (SIP) Application-Level Gateway (ALG), FTP ALG |
| NAT max sessions |
>40000 |
| NAT max connections per second |
3000 |
| DynDNS |
ChangeIP.com, DynDNS.com, No-IP.com, dnsomatic |
| IPv6 transition |
Dual Stack |
| Hardware DMZ |
Yes (when enabled, one LAN port will be DMZ port) |
| DMZ host |
Yes |
| CPU |
ARM-based architecture, dual core, hardware flow engine
900 Mhz |
| RAM |
1 GB DDR3 |
| Flash |
256 MB |
| Standards |
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (WPA2 security), 802.11e (wireless QoS) |
| Antennas |
4 external fixed paddle antennas (RV340W) |
| 802.1X supplicant |
Yes |
| SSID-to-VLAN mapping |
Yes |
| Auto channel selection |
Yes |
| WPA/WPA2 |
Yes, including enterprise authentication |
| Access control |
Yes, MAC filtering |
| Rouge access point detection |
No |
| QoS |
Wi-Fi Multimedia (WMM) with unscheduled automatic power save |
| Wireless throughput |
PHY data rate:
2.4 GHz: 450 Mbps 964-QAM), 600 Mbps (256-QAM)
5 GHz: 1.7 Gbps (256-QAM), 2.1 Gbps (1024-QAM)
Total: Up to 2.7 Gbps
(real-world throughput will vary) |
| Recommended user support |
Up to 50 users at 2.4 GHz and 124 users at 5 GHz simultaneously |
| Captive Portal for guest access |
Yes |
| Frequency |
Dual concurrent radios (2.4 and 5 GHz) |
| WLAN |
802.11n/ac
4×4 MU-MIMO with 4 partial streams at 5GHz
3×3 MIMO with 3 spatial streams at 2.4 GHz
20 MHz, 40 MHz and 80 MHZ channels for 802.11ac
20 MHz and 40 MHz channels for 802.11n
PHY data rate:
2.4 GHz: 450 Mbps (64-QAM), 600 Mbps (256-QAM)
5 GHz: 1.7 Gbps (256-QAM), 2.1 Gbps (1024-QAM)
Total: up to 2.7 Gbps
802.11 Dynamic Frequency Selection (DFS)
MU-MIMO up to 3 clients simultaneously |
| Data rates supported |
802.11 a/b/g:
- 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
- 802.11n: 6.5 to 450 Mbps
- 20-MHz bandwidth: MCS 0-15 for supported data rates
- 40-MHz bandwidth: MCS 0-15 for supported data rates
802.11ac:
- 6.5 Mbps to 1.7 Gbps
- 20-MHz bandwidth: MCS 0-9 for supported data rates
- 40-MHz bandwidth: MCS 0-9 for supported data rates
- 80-MHz bandwidth: MCS 0-9 for supported data rates
|
| Frequency band and operating channels |
A (A regulatory domain):
- 2412 to ~2462 MHz: 11 channels
- 5.15 to 5.25 GHz: 4 channels
- 5.25 to 5.35 GHz: 4 channels
- 5.47 to 5.725 GHz: 8 channels
- 5.725 to 5.825 GHz: 5 channels
E (E regulatory domain):
- 2412 to ~2472 MHz: 13 channels
- 5.15 to 5.25 GHz: 4 channels
- 5.25 to 5.35 GHz: 4 channels
- 5.47 to 5.725 GHz: 8 channels
C (C regulatory domain):
- 2412 to ~2462 MHz: 13 channels
- 5.15 to 5.25 GHz: 4 channels
- 5.25 to 5.35 GHz: 4 channels
|
| Transmitter output power |
2.4 GHz
- 802.11b: 17.5 +/- 2 dBm
- 802.11g: 17.5 +/- 2 dBm @ 6 Mbps
- 802.11g: 15.5 +/- 2 dBm @ 54 Mbps
- 802.11n (HT20): 17.5 +/- 2 dBm @ MCS0
- 802.11n (HT20): 15.5 +/- 2 dBm @ MCS7
- 802.11n (HT40): 15.5 +/- 2 dBm @ MCS7
5 GHz
- 802.11a: 18.5 +/- 2 dBm @ 6 Mbps
- 802.11a: 14 +/- 2 dBm @ 54 Mbps
- 802.11n (HT20): 14 +/- 2 dBm @ MCS7
- 802.11n (HT40): 14 +/- 2 dBm @ MCS7
- 802.11ac (VHT80): 12.0 +/- 2 dBm @ VHT9SS
|
| Wireless isolation |
Wireless isolation between clients |
| Antenna gain in dBi |
2.4 GHz: 3 dBi each antenna
5 GHz: 5 dBi each antenna |
| Receiver sensitivity |
2.4 GHz
- 802.11b: -82 dBm @ 11 Mbps
- 802.11g: -71 dBm @ 54 Mbps
- 802.11n (HT20): -69 dBm @ MCS7
- 802.11n (HT40): -67 dBm @ MCS7
5 GHz
- 802.11ac (VHT20): -59 dBm @ MCS8
- 802.11ac (VHT40): -54 dBm @ MCS9
- 802.11ac (VHT80): -51 dBm @ MCS9
|
| Wireless Distribution System (WDS) |
No |
| Dimension |
280 x 44 x 315 mm (11 x 1.75 x 12.40 in) |
| Package Dimensions |
375 x 505 x 80 mm (14.76 x 19.88 x 3.15 in) |
| Product Weight Device Only |
1150 g (2.53 lb) |
| Packaging Weight |
2400 g (5.29 lb) |
| MTBF |
50000 hours |
| Rack mountable |
Yes |
| Included accessories |
Power supply, power cord, Ethernet cable |
| Fan |
No |
| Power Supply |
AC 100-240V/1A DC 12V/3A |
| Certification |
FCC Class B, CE Class B, UL, cUL, CB, CCC, BSMI, KC, Anatel |
| Operating temperature |
0° to 40°C (32° to 104°F) |
| Storage temperature |
0° to 70°C (32° to 158°F) |
| Operating humidity |
10% to 85% noncondensing |
| Storage humidity |
5% to 90% noncondensing |