Ubiquiti Networks UAP-AC-HD UniFi 802.11ac High-Density Indoor Outdoor Access Point
Deploy UniFi AC HD AP in high-density environments requiring maximum wireless performance. The UniFi AC HD AP features simultaneous dual-band, 4×4 MU-MIMO technology and convenient 802.3at PoE+ compatibility.
₹35,999.00 ₹39,999.00 Inc. GST
Deploy UniFi AC HD AP in high-density environments requiring maximum wireless performance. The UniFi AC HD AP features simultaneous dual-band, 4×4 MU-MIMO technology and convenient 802.3at PoE+ compatibility. The Wave 2 MU-MIMO technology allows the AP to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience. The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. It combines the performance increases from MU-MIMO technology and the use of 4×4 spatial streams to deliver up to 125% greater performance than a typical Wave 1 AP.
At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
• Four 1×1 clients
• Two 2×2 clients
• One 2×2 clients and two 1×1 clients
• One 3×3 clients and one 1×1 client
Product Features
• Radio Hardware Acceleration: Independent 2.4GHz and 5GHz dedicated hardware offload for maximized multi-user throughput and reduced latency
• CPU Hardware Acceleration: Dedicated hardware offload for QoS, Guest Control, and Client Management
• Optimized for MU-MIMO: Genetically optimized antenna arrays for maximal utilization of 802.11ac Wave 2 MU-MIMO Beam Forming
• Beam Forming: Data is sent and received using multiple antennas to increase throughput and range
Product Specifications
• Dimensions: 220 x 220 x 49.1mm (8.66 x 8.66 x 1.89″)
• Weight: 700g (1.54lbs)
• Weight w/ Mounting Kits: 830g (1.83lbs)
• Networking Interface: (2) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
• Supported Voltage Range: 44 to 57VDC
• Power Supply: 48V, 0.5A PoE Gigabit Adapter
• Power Save: Supported
• Maximum Power Consumption: 17W
• TX Power:
2.4GHz: 6-25dBm
5GHz: 6-25dBm
• Antennas:
2.4GHz: (2) Dual-Port, Dual-Polarity Antennas, 3dBi each
5GHz: (2) Dual-Port, Dual-Polarity Antennas, 4dBi each
• Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID: Up to Four per Radio
• Mounting: Wall/Ceiling (Kits Included)
• Operating Temperature: -10 to 70°C (14 to 158°F)
• Operating Humidity: 5 to 95% non-condensing
• Certifications: CE, FCC, IC
Advanced Traffic Management
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 500+
Supported Data Rates (Mbps)
• 802.11a: 6, 9, 12,18, 24, 36, 54 Mbps
• 802.11n: 6,5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
• 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Product Includes:
• (1) UniFi AP AC HD
• (1) Mounting Bracket
• (1) Ceiling Backing Plate
• (4) Flat Head Screws
• (4) Keep Nuts
• (4) Screws
• (4) Screw Anchors
• (1) Gigabit PoE (48V, 0.5A) with Mount Bracket
• (1) Power Cord
• (1) Quick Start Guide
Brand
Ubiquiti
Related products
-
Computer Networking, Controllers
TP-Link OC200 Omada Cloud Controller
The OC200 Omada Cloud Controller dedicate to provide centralized management for the whole Omada network. Monitor statistics in real-time, view a graphical analysis of network traffic, create a captive portal, upgrade and reboot your system, and easily scale your network to boost your business.
SKU: OC200 -
Access Point, Computer Networking
TP-Link EAP225-Outdoor AC1200 Wireless MU-MIMO Gigabit Outdoor Access Point
-49%
Access Point, Computer NetworkingTP-Link EAP225-Outdoor AC1200 Wireless MU-MIMO Gigabit Outdoor Access Point
Extend the reach of your Wi-Fi network outdoors with the EAP225-Outdoor Wireless AC1200 Gigabit Indoor/Outdoor Access Point from TP-Link. This wireless-AC access point operates on the 802.11a/b/g/n/ac Wi-Fi network standards and operates on both the 2.4 GHz and 5 GHz frequencies supporting data transfer rates of up to 1200 Mb/s. In addition to enhanced wireless coverage and network speeds, this access point is designed to stand up against the elements, thanks to the durable weatherproof housing. Installation is simple, as the EAP225-Outdoor access point comes with both pole- and wall-mounting kits and supports PoE connectivity to eliminate the need to run a standalone power supply to the AP. Once installed, free Omada Controller Software makes it easy to manage this AP as well as hundreds of other APs while the captive portal simplifies the process of authenticating guests.
SKU: EAP225-Outdoor -
-
Access Point, Computer Networking
TP-Link EAP115-Wall 300Mbps Wireless N Wall-Plate Access Point
-25%
Access Point, Computer NetworkingTP-Link EAP115-Wall 300Mbps Wireless N Wall-Plate Access Point
- Easy-mount construction allows installation into any standard EU-type data wall-box
- Compact, low-profile design fits discreetly with any existing interior style
- Cloud Controller Software enables administrators to easily manage hundreds of EAPs
- Support Power over Ethernet (802.3af) for convenient and affordable installation
- Enterprise-class Wi-Fi security helps to decrease network security threats
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Supports management VLAN for an enhanced network management
SKU: EAP115-Wall
