Cisco Catalyst 2960X-24TD-L 24-Port Gigabit Ethernet Switch

Cisco Catalyst 2960X-24TD-L series switch is the next generation of the world’s most widely deployed access switches. It enables intelligent services such as application visibility; smart operations layer 3 routing and deliver best-in-class energy efficiency with up to 80 percent energy savings.

88,999.00 140,000.00 Inc. GST

cash on delivery icon


The Cisco Catalyst 2960-X series switch is scalable and resilient. With Cisco FlexStack-Plus stacking, which allows stacking of up to 8 switches and delivers 80 Gbps of stacking bandwidth, the Cisco Catalyst 2960-X enables ease of operation and management with a single configuration across the members of the stack. The Cisco Catalyst 2960-X series is resilient, with control plane redundancy across FlexStack-Plus switches. This minimizes traffic disruption if any stack member fails.


The Cisco Catalyst 2960-X series enable intelligent access services, application visibility and control, and best-in-class energy management. Build for application visibility and control, these switches support NetFlow-Lite, which can be used to monitor, capture, and record traffic flows through the network. With industry-leading energy management capabilities such as Cisco EnergyWise to measure and control power usage, Energy Efficient Ethernet (EEE) and Switch and Downlink Hibernation modes to conserve power during periods of inactivity in the network, the Cisco Catalyst 2960-X with up to 80 percent energy savings is the greenest switch in the industry.


Cisco Catalyst 2960-X series switch is simple to deploy, manages, and troubleshoots. As part of the Cisco Unified Access portfolio, the Cisco Catalyst 2960-X series switch is fully integrated with Cisco Prime to offer simple operation from a central location. It can also be managed by Cisco Network Assistant, which features an intuitive GUI where users can easily apply common services across Cisco switches and routers.

SKU: 2960X-24TD-L Categories: ,
  • Header

    • Cisco Systems
    • Cisco
    • Cisco Catalyst
    • 2960X-24TD-L
    • 1
  • Processor

    • APM86392
    • APM86392
    • 1
    • 600 megahertz
  • RAM

    • 512 megabyte
  • Flash Memory

    • 128 megabyte, 128 megabyte
  • Performance

    • Forwarding performance (64-byte packet size): 95.2 Mpps, Switching capacity: 216 Gbps
  • Capacity

    • Active VLANs: 1023
  • Networking

    • Switch
    • Network hubs and switches
    • Gigabit Ethernet
    • Desktop, Rack-mountable
    • Stackable
    • 8
    • 24
    • 9216 bytes
    • Yes
    • RMON 2, HTTP, Telnet, RMON 1, SNMP 2c, SSH, CLI, SNMP 3, SNMP 1, TFTP
    • Status, Port transmission speed, System, RPS (Redundant Power Supply), Link/activity, Port duplex mode
    • Auto-uplink (auto MDI/MDI-X), Remote Switch Port Analyzer (RSPAN), VLAN support, Port Aggregation Protocol (PAgP) support, DHCP relay, Access Control List (ACL) support, Class of Service (CoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), LLDP support, Management Information Base (MIB), DiffServ support, Strict Priority Queuing (SPQ), Multicast Storm Control, MLD snooping, MAC Address Notification, Shaped Round Robin (SRR), Unicast Reverse Path Forwarding (URPF), IPv6 support, Quality of Service (QoS), Multicast VLAN Registration (MVR), Hot Standby Router Protocol (HSRP) support, Full duplex capability, Cisco FlexStack Plus, Syslog support, Spanning Tree Protocol (STP) support, Auto-negotiation, Dynamic ARP Inspection (DAI), ARP support, Dynamic Trunking Protocol (DTP) support, Link Aggregation Control Protocol (LACP), Energy Efficient Ethernet, Trivial File Transfer Protocol (TFTP) support, DiffServ Code Point (DSCP) support, DHCP snooping, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, Uni-Directional Link Detection (UDLD), Multiple Spanning Tree Protocol (MSTP) support, Cisco EnergyWise technology, BOOTP support, Unicast Storm Control, Broadcast Storm Control
    • IEEE 802.3ae, IEEE 802.3ab, IEEE 802.3u, IEEE 802.1p, IEEE 802.3ah, IEEE 802.1w, IEEE 802.3z, IEEE 802.1D, IEEE 802.3, IEEE 802.1s, IEEE 802.1AX, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1Q, IEEE 802.3x, IEEE 802.1x, IEEE 802.3ad (LACP)
  • Ports

    • 24
  • Ports (2nd)

    • 2
    • SFP+
  • Expansion Slots

    • 1 (total) / 1 (free) x Stacking Module slot
  • Interface Provided

    • 2 x SFP+ uplink, 24 x 1000Base-T RJ-45, 1 x management (Gigabit LAN) RJ-45, 1 x mini-USB Type B management, 1 x USB Type A, 1 x console RJ-45 management
  • Software

    • Cisco IOS LAN Base
  • Power Device

    • Internal power supply
    • Optional
    • AC 120/230 V
    • 50/60 hertz
    • 24.9 watt
    • Redundant Power System (RPS) connector
  • Miscellaneous

    • Gray
    • 1
    • TACACS+, RADIUS, Kerberos, Secure Shell (SSH)
    • 569,520 Hours
    • EN55022 Class A, BSMI CNS 13438 Class A, EN 300386, CSA C22.2 No. 60950-1 Second Edition, VCCI Class A, EN 60950-1 Second Edition, UL 60950-1 Second Edition, RoHS, FCC CFR47 Part 15, EN 61000-3-3, IEC 60950-1 Second Edition, KN24, ICES-003 Class A, KN22 Class A, CISPR 22 Class A, EN 61000-3-2, RoHS 2011/65/EU, AS/NZS 60950-1, CISPR 24, EN55024