-40%
,

Teltonika RUT200 4G LTE Industrial LTE Router

Teltonika Networks
Add to wishlist
Compare
Mobile module : 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Wireless mode : IEEE 802.11b/g/n, Access Point (AP), Station (STA) WiFi users : Up to 50 simultaneous connections ETHERNET : 1 x WAN port 10/100 Mbps, 1 x LAN port, 10/100 Mbps SECURITY : Pre-shared key, digital certificates, X.509 certificates, Pre-configured firewall rules can be enabled via WebUI

₹11,999.00 ₹19,999.00 Inc. GST

cash on delivery icon
Compare
SKU: RUT200 Categories: ,
Brands

Teltonika Networks
Mobile network
Mobile module 4G (LTE) – Cat 4 up to 150 Mbps
3G – up to 42 Mbps
2G – up to 236.8 kbps
Status Signal Strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received
SMS SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS,
SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreplay, SMPP
Black/white list Black/white list of operators
Bandwidth management Band lock, display of bandwidth status in use
APN Auto APN
Bridge mode Direct connection (bridge) between mobile ISP and device in LAN
Passthrough The router assigns its mobile WAN IP address to another device on the LAN
Multiple PDNs (optional) Ability to use different PDNs to access multiple networks and services
(not available in standard FW)
Wireless networks
Wireless mode IEEE 802.11b/g/n, access point (AP), station (STA)
Wi-Fi security WPA2-Enterprise – PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID SSID stealth mode and access control based on MAC address
Wi-Fi users Up to 50 simultaneous calls
Hotspot Captive portal (hotspot), internal/external Radius server, embedded in a configurable landing page
Ethernet
WAN 1x WAN (can be configured for LAN) 10/100 Mbps,
IEEE 802.3, IEEE 802.3u compliant, supports Auto MDI/MDIX
LAN 1x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards,
automatic MDI/MDIX support
Network
Routing Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS,
ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers for proper routing of VoIP packets
Call monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forwarding, network traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP relayd
QoS Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS >25 service providers supported, others can be configured manually
Network backup VRRP, mobile, wired, Wi-Fi options, any of which can be used as a backup,
using automatic failover
Load balancing Balancing Internet traffic across multiple WAN connections
SSHFS (optional) Possibility of mounting a remote file system via SSH protocol (not available in standard software)
Security
Authentication Shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via Web.UI,
Unlimited firewall configuration via CLI, DMZ, NAT, NAT-T
Preventing attacks DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention),
Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Tag-based VLAN separation
Mobile limit control Setting custom data limits for the SIM card
WEB Filter Black list to block unwanted websites, white list to determine allowed sites
Access control Flexible access control for TCP, UDP, ICMP packets, MAC address filters
VPN
OpenVPN Ability to run multiple clients and servers simultaneously, 12 encryption methods
OpenVPN encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC,
RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/server services can run simultaneously
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code
SSTP SSTP client instance support
ZeroTier ZeroTier VPN
WireGuard WireGuard VPN client and server support
Modbus TCP Slave
ID filtering Reply to one identifier in the range [1;255] or any
Allow remote access Allow access over WAN
Custom Registers MODBUS TCP Custom Register Block requests that read/write to a file
inside the router and can be used to extend the functionality of the MODBUS TCP Slave
Modbus TCP Master
Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first);
32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus data to server
Protocol HTTP(S), MQTT, Azure MQTT
MQTT Gateway
MQTT Gateway Enables sending commands to and receiving data from a MODBUS Master via an MQTT broker
Monitoring and management
Web.UI HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting,
event log, system log, kernel log
FOTA Remote firmware update from server, automatic notifications
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET
Call Restart, Status, WiFi on/off,
Mobile data on/off, Output on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC API management over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS) – Teltonika Remote Management System
IoT platforms
The cloud of things Allows monitoring of: Device data, Mobile data, Network information, Availability
ThingWorx Allows you to monitor: WAN Type, WAN IP Mobile Operator Name,
Cellular signal strength, Cellular network type
Cumulocity Allows you to monitor: Device model, revision and serial number,
Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP
Azure IoT Hub Can send device IP, number of bytes sent/received/ 3G connection status, network link status,
IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal,
WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number,
connection type, temperature, Azure IoT Hub server PIN number
System parameters
CPU Mediatek MIPS 24Kc 580 MHz
RAM 128 MB, DDR2
Flash Memory 16 MB, SPI Flash
Software/Configuration
Web.UI Update software from file, check software on server,
configuration profiles, configuration backup, restore point
FOTA Software/configuration update from server
RMS Software/configuration update for multiple devices
Save settings Software update without losing current configuration
Operating System RutOS (OpenWrt operating system based on Linux)
Supported languages Busybox shell, Lua, C
Development tools GPL package with included graphical environment
Inputs/Outputs
Inputs 1 x digital input,
0-5 V detected as logic low,
8-30 V detected as logic high
Outputs 1 x digital open collector output, max. output voltage 30 V, 300 mA
Event handling SMS, EMAIL, RMS
Power supply
Connector 4-pin industrial DC power connector
Input voltage range 9 – 30 VDC (4-pole industrial socket),
reverse polarity protection, surge protection >33 V DC 10 us max.
PoE (passive) Passive PoE over spare pairs (available from hardware version 0007 and batch number 0010)
Power over LAN port, incompatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption 6.5 W
Physical interfaces (ports, LED, antennas, buttons, SIM)
Ethernet 2 × RJ-45, 10/100 Mbps
I/O 1 x digital input, 1 x digital output on 4-pin power connector
LEDs 3x connection type status LED,
5x connection strength LED,
2x LAN status LED,
1x Power LED
SIM 1x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
External SIM tray
Power supply 4-pin industrial DC power connector
Antennas 2x SMA for LTE, 1x RP-SMA for Wi-Fi antenna
Reset Buttons for restarting/restoring factory settings
Physical characteristics
Housing material Aluminium housing with DIN rails, plastic panels
Dimensions 83 mm x 74 mm x 25 mm
Weight 125g
Mounting options Bottom and side mounting holes on DIN rail
Work environment
Ambient temperature range during operation From -40°C to 75°C
Ambient humidity during operation 10% to 90%, non-condensing
Protection class IP30
Certificates
Regulations CB
Security
Standards IEC 62368-1:2018 (CB Scheme).

Related products

Brands Carousel