-24%
,

Ubiquiti PBE-M5-400-ISO PowerBeam M5 ISO 5 GHz airMAX Bridge with RF Isolated Reflector


Install the PBE-M5-400-ISO PowerBeam M5 ISO 5 GHz airMAX Bridge with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Combined with RF isolation to filter out noise, it delivers a cleaner and more reliable connection.

12,999.00 16,999.00 Inc. GST

cash on delivery icon

Install the PBE-M5-400-ISO-US PowerBeam M5 ISO 5 GHz airMAX Bridge with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Combined with RF isolation to filter out noise, it delivers a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.

Improved Noise Immunity

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Radio Design

Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.

airMAX Technology Included

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class

airOS

airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking.

• Protocol Support

• Ubiquiti Channelization

• Spectral Width Adjustment

• ACK Auto-Timing

• AAP Technology

• Multi-Language Support

airView

Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.

• Waterfall Aggregate energy over time for each frequency.

• Waveform Aggregate energy collected.

• Real-time Energy is shown in real time as a function of frequency.

• Recording Automate airView to record and report results.

airControl

airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.

• Network Map

• Monitor Device Status

• Mass Firmware Upgrade

• Web UI Access

• Manage Groups of Devices

• Task Scheduling

Hardware Overview

Innovative Mechanical Design

• Metal-plated interior of rear housing enhances RF shielding.

• Built-in mechanical tilt mounting bracket offers ±20° of tilt.

• Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.

Industrial-Strength Construction

• GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners.

• Dish and brackets made of galvanized steel that are powder‑coated for enhanced corrosion resistance.

• Protective radome shields protect the radio from nature’s harsh elements.

RF Isolation

The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.

SKU: PBE-M5-400-ISO Categories: ,

Brand

Ubiquiti

Processor Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2, 8 MB flash
Networking Interface 1 x 10/100 Ethernet port
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
Power Supply 24 V, 0.5 A PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Voltage Range 18-26 VDC
Power Consumption 8 W (max.)
Gain 25 dBi
Operating Frequency Worldwide: 5170 – 5875 MHz
USA: 5725 – 5850 MHz
Wind Loading 88 lbf @ 125 mph (390 N @ 200 km/h)
Wind Survivability 125 mph (200 km/h)
LEDs 1 x Power
1 x LAN
4 x WLAN
Signal Strength LEDs Software-adjustable to correspond to custom RSSI levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV stabilized plastic
Mounting Pole-mounted kit included
ESD/EMP Protection Air: ± 24 kV
Contact: ± 24 kV
Temperature & Humidity Operating Temperature: -40 to 158°F / -40 to 70°C
Operating Humidity: 5 to 95% non-condensing
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 104° F (40° C), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Output Power Output Power
24 dBm
TX Power Specifications
802.11a
Data Rate / Avg. TX / Tolerance
6 – 24 Mbps / 24 dBm / ± 2 dB
36 Mbps / 24 dBm / ± 2 dB
48 Mbps / 23 dBm / ± 2 dB
54 Mbps / 22 dBm / ± 2 dB
802.11n/airMAX
Data Rate / Avg. TX / Tolerance
MCS0 / 24 dBm / ± 2 dB
MCS1 / 24 dBm / ± 2 dB
MCS2 / 23 dBm / ± 2 dB
MCS3 / 23 dBm / ± 2 dB
MCS4 / 22 dBm / ± 2 dB
MCS5 / 21 dBm / ± 2 dB
MCS6 / 20 dBm / ± 2 dB
MCS7 / 20 dBm / ± 2 dB
MCS8 / 24 dBm / ± 2 dB
MCS9 / 24 dBm / ± 2 dB
MCS10 / 23 dBm / ± 2 dB
MCS11 / 23 dBm / ± 2 dB
MCS12 / 22 dBm / ± 2 dB
MCS13 / 21 dBm / ± 2 dB
MCS14 / 20 dBm / ± 2 dB
MCS15 / 20 dBm / ± 2 dBRX Power Specifications
802.11a
Data Rate / Sensitivity / Tolerance
6 – 24 Mbps / -94 dBm Min. / ± 2 dB
36 Mbps / -80 dBm / ± 2 dB
48 Mbps / -77 dBm / ± 2 dB
54 Mbps / -75 dBm / ± 2 dB
802.11n/airMAX
Data Rate / Sensitivity / Tolerance
MCS0 / -96 dBm / ± 2 dB
MCS1 / -95 dBm / ± 2 dB
MCS2 / -92 dBm / ± 2 dB
MCS3 / -90 dBm / ± 2 dB
MCS4 / -86 dBm / ± 2 dB
MCS5 / -83 dBm / ± 2 dB
MCS6 / -77 dBm / ± 2 dB
MCS7 / -74 dBm / ± 2 dB
MCS8 / -96 dBm / ± 2 dB
MCS9 / -95 dBm / ± 2 dB
MCS10 / -92 dBm / ± 2 dB
MCS11 / -90 dBm / ± 2 dB
MCS12 / -86 dBm / ± 2 dB
MCS13 / -83 dBm / ± 2 dB
MCS14 / -77 dBm / ± 2 dB
MCS15 / -74 dBm / ± 2 dB
Max VSWR 1.5:1
Built-In Mechanical Downtilt ±20°
Dimensions 18.07 x 18.07 x 10.28″ / 459 x 459 x 261 mm
Weight 7.10 lb / 3.22 kg